Hydraulic Feed Controls
MVC225EUM
Designed for applications with low precision requirements
Adjustable
Compression force max. 1,750 N
Stroke 19 mm
There are also plenty of accessories for the FA, MA and MVC models. All products are ready-to-install, maintenance-free, stable in temperature and avoids stick-slip effect. Speeds from 12 mm/min. can be driven at a low thrust force using the adjustment screw on the base of the hydraulic control.
Compression force max. 1,750 N
Stroke 19 mm
_FA_IMG_Single-01-cut-Labels_RGB-L_EN.jpg)
_FA_IMG_Single-01-cut_RGB-L.jpg)
CAD Drawings
Product-Downloads
Basic type MVC225EUM
| Mounting Instructions | 55 kB | 08/10/2010 | |
| English | |||
Dimensions
| Stroke | 19 mm |
Technical data
Compression force min. 25 N Compression force max. 1,750 N Return Force min. 5.0 N Return Force max. 10.0 N Return Time 0.65 s Side Load Angle max. 2 ° Compression force 25 N to 1,750 N N Impact velocity range At speeds of 0.3 m/s the maximum allowed energy is approx. 2 Nm. Where higher energies occur use a shock absorber for the initial impact. Avoid high impact velocities. Adjustment Hard impact at the start of stroke, adjust the ring towards 9 or PLUS. Hard impact at the end of stroke, adjust the ring towards 0 or MINUS. Positive stop Integrated Damping medium oil, temperature stable Material Outer body: nitride hardened steel; Piston rod: steel with black oxide finish or nitride hardened Mounting in any position Operating temperature range 0 °C to 66 °C | NoteDamper is preset at delivery in a neutral position between hard and soft. Safety informationExternal materials in the surrounding area can attack the seal components and lead to a shorter service life. Please contact ACE for appropriate solution suggestions. On requestNickel-plated, weartec finish (seawater resistant) or other special options available on request. |
